- 15 years expierence on Machine Tools & Cutting Tools
- +0086 755 29755156
- +0086 18928488152
- sales01@adstsz.net
LHY Milling holder
EDVT Collet chuck holder
27 9 月, 2019
LHY BT-TER Tool holder
26 9 月, 2019
LHY Milling holder
● Product description:
1.Applicable to deep cavity, deep groove type extension processing, clamping knife hole accuracy 0.005mm, no need for chuck, easy loading and unloading, only need side screw to lock. Good earthquake resistance
2.Tool is installed in the position of positioning pin in order to prevent tool shrinkage during machining.
3.The central through hole design of the extension rod is beneficial to the cooling of effluent.
4.The extension of the extension rod adopts a tapered design, so that the rod and the mold do not rub against each other during processing, and the service life of the cutter and the rod is protected.
● Features:
1.Name:Milling holder
2.T.I.R:0.005mm
3.Hardness:55-58HRC
4.Material:20CrMnTi
Milling holder schematic diagram
| Milling holder | |||||
|---|---|---|---|---|---|
| Model No. | L | D | d1 | M | |
| SLD3 | C8-SLD3-100L | 100 | 8 | 3 | M3*0.5P |
| C10-SLD3-100L | 100 | 10 | 3 | M3*0.5P | |
| C10-SLD3-150L | 150 | 10 | 3 | M3*0.5P | |
| C12-SLD3-100L | 100 | 12 | 3 | M3*0.5P | |
| C12-SLD3-150L | 150 | 12 | 3 | M3*0.5P | |
| C16-SLD3-150L | 150 | 16 | 3 | M3*0.5P | |
| C20-SLD3-150L | 150 | 20 | 3 | M3*0.5P | |
| SLD1/8 | C8-SLD1/8-100L | 100 | 8 | 3.175 | M3*0.5P |
| C10-SLD1/8-100L | 100 | 10 | 3.175 | M3*0.5P | |
| SLD4 | C8-SLD4-100L | 100 | 8 | 4 | M3*0.5P |
| C10-SLD4-100L | 100 | 10 | 4 | M4*0.5P | |
| C10-SLD4-150L | 150 | 10 | 4 | M4*0.5P | |
| C12-SLD4-100L | 100 | 12 | 4 | M4*0.7P | |
| C12-SLD4-150L | 150 | 12 | 4 | M4*0.7P | |
| C16-SLD4-100L | 100 | 16 | 4 | M4*0.7P | |
| C16-SLD4-150L | 150 | 16 | 4 | M4*0.7P | |
| C16-SLD4-200L | 200 | 16 | 4 | M4*0.7P | |
| C20-SLD4-150L | 150 | 20 | 4 | M4*0.7P | |
| SLD5 | C12-SLD5-100L | 100 | 12 | 5 | M4*0.7P |
| C12-SLD5-150L | 150 | 12 | 5 | M4*0.7P | |
| C16-SLD5-100L | 100 | 16 | 5 | M4*0.7P | |
| C16-SLD5-150L | 150 | 16 | 5 | M4*0.7P | |
| SLD6 | C10-SLD6-100L | 100 | 10 | 6 | M4*0.5P |
| C10-SLD6-150L | 150 | 10 | 6 | M4*0.5P | |
| C12-SLD6-100L | 100 | 12 | 6 | M4*0.5P | |
| C12-SLD6-150L | 150 | 12 | 6 | M4*0.5P | |
| C16-SLD6-100L | 100 | 16 | 6 | M5*0.8P | |
| C16-SLD6-150L | 150 | 16 | 6 | M5*0.8P | |
| C16-SLD6-200L | 200 | 16 | 6 | M5*0.8P | |
| C20-SLD6-150L | 150 | 20 | 6 | M5*0.8P | |
| C20-SLD6-200L | 200 | 20 | 6 | M5*0.8P | |
| SLD8 | C12-SLD8-100L | 100 | 12 | 8 | M5*0.5P |
| C12-SLD8-150L | 150 | 12 | 8 | M5*0.5P | |
| C16-SLD8-100L | 100 | 16 | 8 | M5*0.5P | |
| C16-SLD8-150L | 150 | 16 | 8 | M5*0.5P | |
| C16-SLD8-200L | 200 | 16 | 8 | M5*0.5P | |
| C20-SLD8-100L | 100 | 20 | 8 | M5*0.8P | |
| C20-SLD8-150L | 150 | 20 | 8 | M5*0.8P | |
| C20-SLD8-200L | 200 | 20 | 8 | M5*0.8P | |
| SLD10 | C16-SLD10-100L | 100 | 16 | 10 | M5*0.5P |
| C16-SLD10-150L | 150 | 16 | 10 | M5*0.5P | |
| C20-SLD10-100L | 100 | 20 | 10 | M5*0.8P | |
| C20-SLD10-150L | 150 | 20 | 10 | M5*0.8P | |
| C20-SLD10-200L | 200 | 20 | 10 | M5*0.8P | |
| C25-SLD10-200L | 200 | 25 | 10 | M5*0.8P | |
| SLD12 | C20-SLD12-100L | 100 | 20 | 12 | M5*0.5P |
| C20-SLD12-150L | 150 | 20 | 12 | M5*0.5P | |
| C20-SLD12-200L | 200 | 20 | 12 | M5*0.5P | |
| C25-SLD12-200L | 200 | 25 | 12 | M5*0.5P | |
| C25-SLD12-250L | 250 | 25 | 12 | M5*0.5P | |